QSC Audio Products - Passionate About SoundQSC Audio Home Page  
 
Products / Loudspeakers / Line Array Systems

WideLine-10
Specifications


WideLine Array WL2102 front and rear

SPECIFICATIONS
WL2102 (Composilite) WL2102-w (Wood)
Configuration Bi-amp or Tri-amp mode
Transducers
  High Frequency Transducer
  Low Frequency Transducer

1.4" exit, 3" titanium diaphragm, neodymium magnet assembly
2 x 400 W, 16 ohm 10" woofer, 3" voice coil, ceramic magnet assembly
Frequency Response (±3 dB)
Frequency Response (-10 dB)
55 Hz - 18 kHz (with recommended DSP processing)
48 Hz - 20 kHz (with recommended DSP processing)
Nominal Impedance
HF: 16 ohms
LF bi-amp mode: 8 ohms
LF tri-amp mode: 16 ohms (x 2)
Continuous Power Capacity HF: 80 W (2 hours, AES1984-2 method, 1 - 10 kHz)
LF bi-amp mode: 600 W (2 hours, AES1984-2 method, 80 - 800 Hz)
LF tri-amp mode: 400 W (x2) (2 hours, AES1984-2 method, 80 - 800 Hz)
Max Recommended Power
HF: 300 W
LF bi-amp mode: 1400 W
LF tri-amp mode: 700 W (x 2)
Sensitivity (1 W at 1 m) HF: 107.5 dB (single cabinet measured in free space.)
LF: 98 dB (single cabinet measured in free space. LF drivers connected in parallel)
Maximum Output (SPL at 1 m)
  Continuous:
  Peak:

HF: 127 dB / LF: 127 dB
HF: 133 dB / LF: 133 dB
Nominal Coverage
Horizontal: 140°
Vertical: Dependent on number of elements used
Enclosure
Cabinet Type Ported, trapezoidal
Material Cored composite Baltic birch plywood
Finish Black texture coat Black or white texture coat
Grille Perforated, formed powder coated steel
Connectors 2 x Neutrik Speakon® NL8 in parallel
Pin Outs
Pins Bi-Amp Tri-Amp
1+/1- LF MF
2+/2- NC LF
3+/3- NC NC
4+/4- HF HF
Attachment Points Integral, adjustable rigging system, vertical splay adjustable in 1° increments from 2 ° to 10° and 0°
Weight 70 lbs (31.8 kg) net
78 lbs (35.5 kg) shipping
83 lbs (37.7 kg) net
91 lbs (41.4 kg) shipping
Dimensions (HxWxD)
10.75" x 27.5" x 20.25"
(27.3 cm x 69.85 cm x 51.43 cm)
 

Specifications subject to change without notice.

Speakon is a trademark of Neutrik

FEATURES

  • Multiple aperture diffraction slot waveguide provides exceptionally wide horizontal coverage (140°) and a near ideal vertical line source
  • Exceptionally high output capability in a very compact form factor
  • Bi-amp or tri-amp design
  • Dual 10" long excursion, high power, low-frequency transducers
  • Single 3" diaphragm neodymium compression driver
  • WL2102 - Cored composite construction results in lighter weight (70 lbs, 31.8 kg) and greater weather resistance
  • WL2102-w - Birch ply construction offers reasonable weight (83 lbs, 37.7 kg) at a lower cost
  • Fully captive hardware design incorporates all components necessary for box to box rigging

TOP

Español

LINE ARRAY SYSTEMS


DOCUMENTS

WideLine-10 Specifications (PDF 202K)
User Manual - Multilingual (PDF 800K)
Pro Audio Review, August 2005 (PDF 264K)

CAD DRAWINGS

WideLine WL2102 (DXF/DWG zipped 135K)
WideLine WL2102-w (DXF/DWG zipped 445K)
Fly Grid (DXF/DWG zipped 116K)
Stacking Grid (DXF/DWG zipped 126K)

EASE DOWNLOADS

WideLine EASE 4 DLL (ZIP 361K)

SOFTWARE

WideLine Aiming Software:
EASE Focus for WideLine

DSP VOICINGS

WL2102 Processor Settings

ARCHITECT'S & ENGINEER'S SPECIFICATIONS

WL2102
WL2102-w

RELATED PRODUCTS

WL218-sw WideLine Subwoofer
ISIS 215PCM
QSControl.net BASIS/RAVE/DSP

wideline in the news...

Jason Mraz on Tour with the QSC Audio WideLine-10 Line Array System Jason Mraz on Tour with the QSC Audio WideLine-10 Line Array System
Mar 12, 2010

QSC Audio Donates Audio Support to Star-Studded Haiti Fundraiser QSC Audio Donates Audio Support to Star-Studded Haiti Fundraiser
Feb 19, 2010
Over $200K Raised to Assist Earthquake-ravaged Nation...

A NIGHT AT THE OSCARS A NIGHT AT THE OSCARS
Apr 13, 2009
QSC WideLines seen and heard at Elton John’s star-studded party...

More news about wideline

View All Current News