QSC Audio Products - Passionate About SoundQSC Audio Home Page  
 
Products / Loudspeakers / AcousticDesign / Surface Mount

AcousticDesign™ Series
AD-S52


AD-S52

AcousticDesign AD-S52

(Mounting hardware - ball mount included, yoke mount optional)

The QSC AcousticDesign™ AD-S52 is a full range, surface mount loudspeaker with sleek, contemporary styling that fits perfectly into multiple environments and applications including hotels, restaurants, convention facilities, and multimedia environments. The loudspeaker's low frequency driver is magnetically shielded, making the AD-S52 perfect for use near video monitors. Available in black or white, these great sounding, weather resistant enclosures can be painted to match any specific decor.

The AD-S52 is a high output, 2-way design incorporating a 5.25" weatherproof, LF transducer and a 1" neodymium tweeter. This exceptional loudspeaker carries the added benefit of built-in dynamic power protection - thus ensuring system reliability in the event of overload conditions.

The AD-S52T models are equipped with a 70V/100V matching transformer for distributed audio systems. There is a transformer tap switch on the rear panel for setting the power level of the loudspeaker. This switch may also be set for 8-ohm operation, bypassing the transformer completely - providing greater system flexibility compared to most competing products.

The AD-S52 system package includes a ball mount assembly for convenient installation of the enclosure in a wide variety of orientations. If desired, the ball mount adapter's back plate can be removed, reducing the overall depth of the assembly and the footprint of the mount on the wall. Further, the assembly includes a weather resistant input connection cover to protect the 5-way binding post input terminals.

FEATURES
  • 5.25 Inch, 2-way Design - in a lightweight, contemporary styled multipurpose enclosure
  • Magnetically Shielded LF Transducer - ideal for use near video monitors
  • Flexible Ball Mount Assembly Included - for convenient installation
  • 70V/100V Transformer Versions Available - for use with distributed audio systems
  • Available Optional Yoke Mount Bracket

AD-S52 Contents

Package Includes:


2 qty. AD-S52 or AD-S52T loudspeakers
2 qty. Ball mounts

2 qty. Connector protection caps



SPECIFICATIONS AD-S52 AD-S52T
Configuration Compact two way, ported enclosure Compact two way, ported enclosure
Transducers
  Low Frequency Transducer
  High Frequency Transducer

5.25" shielded, weather-resistant
1" neodymium tweeter

5.25" shielded, weather-resistant
1" neodymium tweeter
Frequency Range 1
  Frequency Response (±3 dB)
  Useable Frequency Range (-10 dB)

75 Hz - 19 kHz
60 Hz - 20 kHz

75 Hz - 19 kHz
60 Hz - 20 kHz
Maximum Output 2
  Continuous
  Peak

104 dB SPL
110 dB SPL

104 dB SPL
110 dB SPL
Nominal Impedance 8 ohms Switchable 8 ohms
Power Rating 3
60 W (IEC, 100 hours)
60 W (IEC, 100 hours)
Recommended Max Amp Power 120 W RMS 120 W RMS
Sensitivity 4 86.5 dB, 2.83 V, 1 m, free field (4pi) 86 dB, 2.83 V, 1 m, free field (4pi)
Nominal Coverage 90° H x 90° V 90° H x 90° V

TRANSFORMERS

Type n/a Custom low distortion laminated core, wide bandwidth design
Taps n/a 70V 30, 15, 7.5, 3.75 Watts
100V 30, 15, 7.5 Watts

ENCLOSURE

Material Injection molded, weather resistant,
high impact polystyrene
Finish White or black (paintable)
Weather Resistance Yes
Grille Heavy duty powder coated aluminum
Connectors Pair of 5-way binding posts
Mounting Hardware Included ball mount assembly; available optional yoke mount
Weight 15 lb. (6.8 kg) net
22 lb. (10 kg) shipping
18 lb (8.2 kg) net
25 lb (11.4 kg) shipping

1 All frequency ranges specified refer to measured free field response (full space, 4pi)
2 Calculated using specified power capacity and system sensitivity. 6 dB peak-to-average signal ratio assumed.
3 Continuous IEC specified test signal
4 Based on nominal impedance, measured in full-space.

Specifications subject to change without notice.




The versatile mounting options and compact size of the AD-S52 make it a perfect fit for most any application. (Some mounting accessories sold separately)


AcousticDesign Series Surface Mount Loudspeakers

Click Here to see all the AcousticDesign models
AD-S282H AD-S52 AD-S32T AD-S28Tw
AD-S52 AD-S32T
AD-S82
AD-S282H AD-S82 AD-S28Tw Subwoofer

QSC and the QSC logo are registered trademarks of QSC Audio Products LLC in the U.S. Patent and Trademark office and other countries.
AcousticDesign is a trademark of QSC Audio Products, LLC. All other trademarks are the property of their respective owners.



TOP

Español

ACOUSTICDESIGN SERIES


DOCUMENTS

User Manual (PDF 3.5MB)
AD-S52 Specifications (PDF 303K)

HI-RES IMAGES

AD-S52 front
AD-S52 rear
AD-S52T rear
Package contents
Ball mount
Mounted on mic stand
Mounted on mic stand (rear)

RESOURCES

Frequency Response
Enclosure Dimensions

CAD DRAWINGS

AD-S52 (DXF, zipped 4.2MB)

EASE DOWNLOADS

AcousticDesign Series EASE data

ARCHITECT'S & ENGINEER'S SPECIFICATIONS

AD-S52
AD-S52T

ACCESSORIES

YM5 Yoke Mount
User Manual (PDF 426K)
Buy online from QSC:
AD-YM5 (black) (FG-000113-01)
AD-YM5-WH (white) (FG-000113-02)

REPLACEMENT PARTS

AD-S52 Schematic (PDF 466K)




RoHS Compliant
RoHS Compliant



  Get Acrobat Reader