QSC Audio Products - Passionate About SoundQSC Audio Home Page  

K Series

Specifications



K Series K8 K10 K12
SPECIFICATIONS K8 K10 K12
Configuration Trapezoidal 2-way
 Multipurpose 2-way Multipurpose 2-way
Transducers
  Low-frequency
  High-frequency
8" cone transducer
1.75" diaphragm compression driver
10" cone transducer
1.75" diaphragm compression driver
12" cone transducer
1.75" diaphragm compression driver
Frequency Response (-6 dB) 66 Hz - 18 kHz 60 Hz - 18 kHz 52 Hz - 18 kHz
Frequency Range (-10 dB) 61 Hz - 20 kHz 56 Hz - 20 kHz 48 Hz - 20 kHz
Nominal Coverage (-6 dB) 105° conical 90° conical 75° conical
Maximum SPL1 127 dB peak
 129 dB peak 131 dB peak
Amplifiers
Power Output2 1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak 		1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak 		1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
Input Impedance (ohms) XLR / ¼": 40k balanced / 20k unbalanced
XLR / ¼" MIC mode: 2260 balanced
RCA: 10k
Controls Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)
Indicators Power, Signal A, Signal B, Standby, Limit, Mic
Connectors Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100-240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power)		 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material Impact resistant ABS
Finish Black paint
Grille Rugged Powder-Coated Steel Grille
Dimensions (HWD) 17.7" x 11" x 10.6"
450 mm x 280 mm x 269 mm		 20.4" x 12.6" x 11.8"
519 mm x 320 mm x 300 mm		 23.7" x 14" x 14"
603 mm x 356 mm x 356 mm
Weight (Net) 27 lb / 12.2 kg 32 lb / 14.5 kg 41 lb / 18.6 kg
Available Accessories K8 TOTE, K8 YOKE, K SERIES M10 KIT K10 TOTE, K10 YOKE, K SERIES M10 KIT K12 TOTE, K12 YOKE, K SERIES M10 KIT


K Series KSub
SPECIFICATIONS KSub
Configuration 4th Order Bandpass
Transducers
  Low-frequency
2 x 12" cone transducers
Frequency Response (-6 dB) 48 Hz - 134 Hz
Frequency Range (-10 dB) 44 Hz - 148 Hz
Maximum SPL1 130 dB peak
Amplifiers
Power Output2 1000 W continuous Class D (2x500 W)
2000 W peak
Input Impedance (ohms) XLR / ¼": 40k balanced / 20k unbalanced
Controls Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators Power, Signal, Standby, Limit
Connectors Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling On demand, 50 mm variable speed fan
Amplifier Protection Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection Thermal limiting, excursion limiting
AC Power Input Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power)		 100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material Painted birch plywood
Finish Black textured paint
Dimensions (HWD) 26" x 14" x 28.1" (including casters)
665 mm x 356 mm x 714 mm
Weight (Net) 74 lb / 33.6 kg
Available Accessories KSub COVER
1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.

2 Independent of limiters and driver protection circuits.

All Specifications Subject to Change Without Notice.

K Series Amplifier Modules
K Series Amplifier Modules
K8 / K10 / K12   KSub









QSC and the QSC logo are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners. Patents may apply or be pending.