| |
SR-26 Cinema Surround Loudspeaker
Developed specifically for the unique requirements of professional motion picture playback, QSC extends its
commitment to the cinema market with the introduction of the SR-26 Cinema Surround Loudspeaker. As a member of
QSC's DCS Digital Cinema Speaker Series, the SR-26 offers high-power handling, excellent sensitivity, and
extended bass response in a very compact enclosure.
The SR-26 Cinema Surround Loudspeaker features two high-power, long-throw 6.5" low frequency transducers
coupled with a 1" titanium diaphragm compression driver. The system's plywood enclosure features a 15°
down angle baffle and Array Optimized Tuning (AOT) for optimum frequency response. The 150 watt continuous
power rating and sophisticated crossover provides absolute reliability. A 50° controlled vertical
coverage provides for a better reach and more consistent sound pressure levels across the audience area.
The compact black enclosure with black grille blends into any theatre decor. A new quick mount bracket design allows for fast, easy and secure installation. The loudspeaker half of the bracket comes pre-installed on each SR-26. The quick mount wall bracket is purchased separately to allow shipment to the job site ahead of the loudspeakers. A traditional U-bracket is also available in lieu of the quick mount bracket system.
FEATURES
- Parallel outputs for feeding additional units
- 90° horizontal dispersion
- Quick mount bracket for fast, easy and secure installation
- High-power handling capability and rugged plywood enclosure optimized for digital soundtrack reproduction
- THX Approved
|
DCS SERIES
DOCUMENTS
SR-26 Specifications (PDF 192K)
SR-26 User Manual (PDF 208K)
IMAGES
View hi-res Image
CAD DRAWINGS
SR-26 (DXF, zipped 397K)
QM-SW (DXF, zipped 47K)
QM-BW (DXF, zipped
84K)
YM-360 (DXF, zipped
20K)
ACCESSORIES
QM-SW, QM-BW User Manual (PDF 209K)
YM-360 Bracket User Manual (PDF 913K)
RELATED PRODUCTS
DCA Series 2-Channel Amplifiers
DCA Series 4-Channel Amplifiers
DCM Digital Cinema Monitor
|
| SPECIFICATIONS |
SR-26 |
Frequency Range 1
(-6dB, Half space)
(-10dB, Half space) |
48-20,000 Hz
35-20,000 Hz |
| Nominal Coverage |
90° horizontal x 50 ° vertical
(averaged from 1 kHz to 10 kHz, -6 dB) |
| Directivity Index |
7.9 dB |
| Q |
6.2 |
Maximum Output 2
Calculated Peak at rated power
Calculated Continuous |
121 dB
115 dB |
| Impedance |
8 ohms nominal |
Maximum Input Power 3
(100 hours of 6db crest factor
IEC 268 noise spectrum)
(2 hours of 6db crest factor pink
noise, 50 - 20,000 Hz, AES method)
Recommended Amplifier Power |
100 watts RMS
150 watts RMS
300 watts RMS maximum into 8 ohms |
| Sensitivity 1 watt/1 meter, half space |
94 dB
|
| Crossover Frequency |
2.6 kHz |
| Recommended Processing |
Subsonic filter at 50 Hz as provided by QSC DCA amplifiers |
| Connectors |
Barrier strip screw terminals accept up to #10 AWG stranded wire |
| Transducers |
2 x 6.5" long throw low frequency transducers
1" titanium diaphragm compression driver on a CD horn |
| Enclosure |
Plywood, baffle angle is 15° downward |
| Dimensions |
14" W x 23"; H x 11.75" D (363 mm x 589 mm x 299 mm) |
| Weight |
33 lbs. (15 kg) |
|
1 All frequency ranges specified refer to measured free field response (half space, 2pi).
2 Calculated SPL at 1m, (half space, 2pi), speaker operating at rated RMS power with pink noise within specified frequency range.
3 Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz - 20 kHz band limiting, 6 dB signal crest factor.
Specifications subject to change without notice.
|
