SPECIFICATIONS |
SC-424 |
| Nominal Coverage |
90° horizontal by +20 to -30° vertical |
| Frequency Range (-6 dB) |
33 - 20 kHz |
Active Crossover Frequencies
|
250, 1700 and 6000 Hz, 24 dB per octave |
|
LF-4215 |
MHV-1090 |
| Impedance |
4 ohms |
MF: 8 ohms
HF: 8 ohms
VHF: 8 ohms |
| Sensitivity 1 watt/1 meter, half space |
99.5 dB |
Tri-amp
MF:105 dB
HF/VHF: 110 dB
|
Quad-amp
MF: 105 dB
HF: 110 dB
VHF: 110 dB |
|
| Maximum Input Power 1 |
|
|
8 hours of 6 db crest factor
IEC 268 noise spectrum
|
800 watts RMS
|
MF: 275 W RMS
HF/VHF: 230 W RMS
|
MF: 275 W RMS
HF: 150 W RMS
VHF: 80 W RMS |
|
2 hours of 6 db crest factor pink
noise, 50 Hz - 20 kHz, AES method |
1000 watts RMS |
MF: 800 W RMS
HF/VHF: 500 W RMS maximum |
| Recommended Amplifier Power |
1600 watts RMS maximum |
MF: 800 W RMS
HF: 500 W RMS
VHF: 300 W RMS maximum |
| |
|
|
| Recommended Processing |
Subsonic filter below 30 Hz, >18 dB per octave |
4th order LR crossover at 250, 1700 and
6000 Hz via QSC DCM or QSControl.net |
| Connectors |
Barrier strip screw terminals accept up to #10 AWG stranded wire |
Barrier strip screw terminals accept up to #10 AWG stranded wire |
| Transducers |
Two 15" (381mm) high efficiency, extended bass woofer featuring a 4" copper voice coils |
MF: 10" high-effeciency, horn-loaded cone with pahse plug
HF/VHF: coaxial neodymium compression driver with 3.5" (90 mm) HF diaphram and 1.75" (44 mm) VHF diaphram |
| Enclosure |
Quasi B4 alignment, ported enclosure with fully flared ports, symmetrical port design, tuned to 36 Hz, constructed of MDF and heavily braced. Features vandal resistant woofer mounting bolts |
Tilt/Pan Bracket
± 10° vertical tilt
± 10° horizontal pan |
| Dimensions (WxHxD) |
36" x 30" x 20.3"
(910 mm x 762 mm x 516 mm) |
39" x 30" x 20"
990 mm x 762 mm x 508 mm) |
| Net Weight |
172 lbs (78 kg) |
84 lbs (38.5 kg) |
| System Weight |
256 lbs (116 kg) |
| Baffle Cut-Out |
76" x 32" |
SPECIFICATIONS |
SC-424-8 |
| Nominal Coverage |
90° horizontal by +20 to -30° vertical |
| Frequency Range (-6 dB) |
33 - 20 kHz |
Active Crossover Frequencies
|
250, 1700 and 6000 Hz, 24 dB per octave |
|
LF-4215-8 |
MHV-1090 |
| Impedance |
8 ohms |
MF: 8 ohms
HF: 8 ohms
VHF: 8 ohms |
| Sensitivity 1 watt/1 meter, half space |
99.5 dB at 2.83 Vrms |
Tri-amp
MF:105 dB
HF/VHF: 110 dB
|
Quad-amp
MF: 105 dB
HF: 110 dB
VHF: 110 dB |
|
| Maximum Input Power 1 |
|
|
8 hours of 6 db crest factor
IEC 268 noise spectrum
|
800 watts RMS
|
MF: 275 W RMS
HF/VHF: 230 W RMS
|
MF: 275 W RMS
HF: 150 W RMS
VHF: 80 W RMS |
|
2 hours of 6 db crest factor pink
noise, 50 Hz - 20 kHz, AES method |
1000 watts RMS |
MF: 800 W RMS
HF/VHF: 500 W RMS maximum |
| Recommended Amplifier Power |
1600 watts RMS maximum |
MF: 800 W RMS
HF: 500 W RMS
VHF: 300 W RMS maximum |
| |
|
|
| Recommended Processing |
Subsonic filter below 30 Hz, >18 dB per octave |
4th order LR crossover at 250, 1700 and
6000 Hz via QSC DCM or QSControl.net |
| Connectors |
Barrier strip screw terminals accept up to #10 AWG stranded wire |
Barrier strip screw terminals accept up to #10 AWG stranded wire |
| Transducers |
Two 15" (381mm) high efficiency, extended bass woofer featuring a 4" copper voice coils |
MF: 10" high-effeciency, horn-loaded cone with pahse plug
HF/VHF: coaxial neodymium compression driver with 3.5" (90 mm) HF diaphram and 1.75" (44 mm) VHF diaphram |
| Enclosure |
Quasi B4 alignment, ported enclosure with fully flared ports, symmetrical port design, tuned to 36 Hz, constructed of MDF and heavily braced. Features vandal resistant woofer mounting bolts |
Tilt/Pan Bracket
± 10° vertical tilt
± 10° horizontal pan |
| Dimensions (HxWxD) |
36" x 30" x 20.3"
(910 mm x 762 mm x 516 mm) |
39" x 30" x 20"
990 mm x 762 mm x 508 mm) |
| Net Weight |
172 lbs (78 kg) |
84 lbs (38.5 kg) |
| System Weight |
256 lbs (116 kg) |
| Baffle Cut-Out |
76" x 32" |