Amplifiers |
 |
GX Series NEW
 |
GX Series amplifiers are ideal for professional entertainers who require maximum performance and portability on a limited budget. GX amplifiers deliver just the right amount of power to the most popular speakers used by entertainers. |

|
PLX2 Series
|
Built on the third generation of QSC PowerLight technology, PLX2 amplifiers combine light weight, superlative audio quality and proven QSC reliability. With power ratings up to 3,600 watts, PLX2 amplifiers are capable of providing plenty of clean, undistorted output to the most power hungry speaker systems. (For 1st generation PLX models, click here) |
 |
RMX Series
 |
Rugged and reliable RMX amplifiers deliver true studio-quality sound with low distortion and ruler-flat frequency response. |
Loudspeakers |
| HPR SERIES |
 |
HPR122i Multipurpose Powered Loudspeaker
 |
The HPR 122i bi-amplified, 2-way multipurpose loudspeaker is ideally suited for use as a main PA or monitor. A 500 watt (400 LF / 100 HF) power module based on best selling RMX Series technology drives a 12" neodymium low-frequency woofer with a 3" voice coil and a 1.4" diaphragm neodymium compression driver. Nine M10 suspension points allow for multiple suspended applications. |
 |
HPR152i Powered Loudspeaker
 |
The HPR152i bi-amplified, 2-way powered loudspeaker features a 15" driver with a 3" voice-coil and 1.75" (diaphragm) compression driver on a 90° x 60°. A 500 watt (400 LF / 100 HF) power module includes a 100 Hz high-pass filter for use in subwoofer-equipped systems. 3 M10 rigging points allow for suspended installation. |
 |
HPR153i Powered Loudspeaker
 |
The HPR153i tri-amplified, 3-way powered loudspeaker is a great choice when the warmth, clarity and projection of a horn loaded, cone midrange system is desired. Features a 15" low frequency driver, a 6" cone driver that seamlessly covers the critical vocal region and a 1.4" (diaphragm) compression driver delivers brilliant top end response. The 600 watt (400 LF / 100 MF / 100 HF) power module includes a 100 Hz high-pass filter for use in subwoofer-equipped systems. 3 M10 rigging points allow for suspended installation. |
 |
HPR151i Powered Subwoofer
|
The HPR151i's 15" driver and 700 watt power module is capable of producing 133 dB peak SPL with frequency response down to 43 Hz and sound quality that rivals many 18" subwoofers. A top-mounted 35mm pole socket is provided for use in sub/satellite systems. |
 |
HPR181i Powered Subwoofer
|
The HPR181i single 18" subwoofer offers truly impressive low frequency extension and output. A 4" voice-coil driver and a 700 watt power module work to produce 134 dB SPL peak with frequency response down to 39 Hz. The HPR181W also includes a top-mounted 35mm pole socket and heavy-duty 3" casters to facilitate load-in and load-out. |
| ISIS SERIES |
 |
ISIS I-282H
|
The I-282H is a dual 8-inch, high-power, full-range loudspeaker with contemporary styling that is an ideal solution to a variety of mobile sound reinforcement applications. |
 |
ISIS I-82H
|
The I-82H is an 8-inch, 2-way, full-range loudspeaker with contemporary styling that integrates into multiple environments. |
Digital Signal Processors |
 |
DSP-3

|
Provides two channels of independent DSP, configurable using an advanced "click-and-drop" software interface. |
 |
DSP-30

|
Combines easy-to-use, customizable, two-channel digital signal processing with a simple mode selection interface that requires only two buttons. |
 |
DSP-4
|
Featuring balanced XLR inputs and outputs plus improved signal-to-noise performance, the DSP-4 provides two channels of independent DSP, configurable via an intuitive "click-and-drop" software interface. |
Software Downloads |
| Firmware Upgrades |
Firmware upgrades for DSP models, CM16a, DCM and RAVE models |
| Signal Manager |
The Signal Manager software controls DSP 3, DSP 4 & DSP 30 processors in a stand-alone operation. |
| TOP |