Archived Products (Out of production)

QSC Audio will continue to support and service these products.

Archived Amplifiers

	PowerLight Series (discontinued) The PowerLight Series feature PowerLight switchmode power supplies and DataPorts in 2 RU and 3 RU models. This series produced some of QSC's most powerful amplifiers like the PowerLight 6.0 and the 9000 watt PowerLight 9.0^PFC. The PowerLight 3 Series replaces these models. 1.0 \| 1.0HV \| 1.4 \| 1.5x \| 1.6HVx \| 1.8 \| 2.0HV \| 2.4MB \| 3.4 \| 3.8 \| 4.0 \| 6.0 II \| 6.0^PFC\| 9.0^PFC
	PowerLight2 Series (discontinued) The PowerLight2 Series are 2 RU chassis amplifiers with DataPorts and PowerLight switchmode power supplies. The "A" models offer internal analog signal processing. The PowerLight 3 Series replaces these models. PL218 \| PL224 \| PL230 \| PL236 \| PL218A \| PL224A \| PL230A \| PL236A
	PLX Series (discontinued) The PLX Series are small, lightweight amplifiers featuring PowerLight switchmode power supplies. The low current draw and Advanced Thermal Management System make the PLX Series amplifiers ideal for portable sound reinforcement. The PLX2 Series replaces these 1st generation PLX models. PLX1202 \| PLX1602 \| PLX2402 \| PLX3002 \| PLX3402
	MX Series (discontinued) QSC's award-winning MX/MXa Series amplifiers combine ultra-clean audio performance and unsurpassed reliability while delivering maximum power under the most demanding conditions. The MXas achieve superior performance with high-efficiency stepped linear output circuits,ensuring solid two-ohm operation, night after night. MX700 \| MX1500a \| MX2000a \| MX3000a
	USA Series (discontinued) USA Series amplifiers deliver legendary QSC reliability and audio performance at an economical price. Three models offer a range of power from 250 to 1000 watts per channel at 2 ohms. USA400 \| USA900 \| USA1310

Archived Loudspeakers

HPR Series Powered Loudspeakers
The HPR Series offers performers the power, technology and legendary reliability of QSC amplification combined with the simplicity and convenience of powered loudspeaker systems. Rugged Baltic birch plywood construction with 16 gauge steel grilles and power modules based on the best selling RMX Series technology result in road-worthy loudspeakers that you can depend on day in and day out.
	HPR122i Multipurpose Powered Loudspeaker (discontinued) The HPR 122i bi-amplified, 2-way multipurpose loudspeaker is ideally suited for use as a main PA or monitor. A 500 watt (400 LF / 100 HF) power module based on best selling RMX Series technology drives a 12" neodymium low-frequency woofer with a 3" voice coil and a 1.4" diaphragm neodymium compression driver. Nine M10 suspension points allow for multiple suspended applications.
	HPR152i Powered Loudspeaker (discontinued) The HPR152i bi-amplified, 2-way powered loudspeaker features a 15" driver with a 3" voice-coil and 1.75" (diaphragm) compression driver on a 90° x 60°. A 500 watt (400 LF / 100 HF) power module includes a 100 Hz high-pass filter for use in subwoofer-equipped systems. 3 M10 rigging points allow for suspended installation.
	HPR153i Powered Loudspeaker (discontinued) The HPR153i tri-amplified, 3-way powered loudspeaker is a great choice when the warmth, clarity and projection of a horn loaded, cone midrange system is desired. Features a 15" low frequency driver, a 6" cone driver that seamlessly covers the critical vocal region and a 1.4" (diaphragm) compression driver delivers brilliant top end response. The 600 watt (400 LF / 100 MF / 100 HF) power module includes a 100 Hz high-pass filter for use in subwoofer-equipped systems. 3 M10 rigging points allow for suspended installation.
	HPR151i Powered Subwoofer (discontinued) The HPR151i's 15" driver and 700 watt power module is capable of producing 133 dB peak SPL with frequency response down to 43 Hz and sound quality that rivals many 18" subwoofers. A top-mounted 35mm pole socket is provided for use in sub/satellite systems.

	HPR181i Powered Subwoofer The HPR181i single 18" subwoofer offers truly impressive low frequency extension and output. A 4" voice-coil driver and a 700 watt power module work to produce 134 dB SPL peak with frequency response down to 39 Hz. The HPR181W also includes a top-mounted 35mm pole socket and heavy-duty 3" casters to facilitate load-in and load-out.
	ISIS 215PCM Powered Subwoofer (discontinued) The 215PCM subwoofer features dual 15" drivers and provides power amplification not only for itself, but also two channels for driving full-range or bi-amp "top box" speakers as well. The WL218-sw, WL212-sw, GP218-sw & GP212-sw are replacement subwoofers.
	ModularDesign Powered Series (discontinued) QSC's self-powered additions to the MD (ModularDesign™) Series. The same robust and versatile enclosures, now adding the PM1000 & PM1400 power modules, the most compact, lightweight and efficient loudspeaker power modules currently available. MD-FP122/64r \| MD-FP122/66 \| MD-FP122/94r \| MD-FP122/96r \| MD-FP122/124r MD-FP152/64r \| MD-FP152/66 \| MD-FP152/94r \| MD-FP152/96r \| MD-FP152/124r MD-LP115 \| MD-LP118
	ModularDesign Powered Subwoofers (discontinued) The MD Powered Subwoofers feature dual 15" or 18" front-loaded drivers, and integrated Class-D PM1400 power modules, which supply 1400 watts of continuous power with state-of-the-art signal processing. MD-SP215 \| MD-SP218
	ModularDesign Series (discontinued) Conceived as a family of modular, arrayable, full-range and low-frequency products, the MD Series includes six full-range models available in three coverage patterns with either 12" or 15" low-frequency drivers and two low-frequency models with single 15" and 18" transducers. MD Series loudspeakers are available in black or white finishes. MD-F122/64r \| MD-F122/94r \| MD-122/124r \| MD-152/64r \| MD-152/94r \| MD-152/124r MD-L115 \| MD-L118
	ModularDesign Subwoofers(discontinued) The MD-S215 and MD-S218 subwoofers offer dual 15" and 18" front-loaded drivers, respectively and available in black or white finishes.
	ISIS Multipurpose Series (discontinued) The ISIS Multipurpose speakers are compact, portable, multi-purpose loudspeakers that extend QSC's commitment to the corporate industrial and special event live sound reinforcement markets. 102M \| 102W \| 122M \| 152M

Archived Digital Signal Processors

	DCM-1 & DCM-3 Digital Cinema Monitor (discontinued) QSC's Digital Cinema Monitors provide signal processing and monitor functions in a single integrated system. The DCM10D & DCM30D are replacement models for the DCM-1 and DCM-3
	DCM 10 & DCM 30 Digital Cinema Monitor (discontinued) QSC's Digital Cinema Monitors provide signal processing and monitor functions in a single integrated system. The DCM10D & DCM30D are replacement models for the DCM 10 and DCM 30

Archived Network Audio Systems

	RAVE Systems (discontinued) RAVE™ (Routing Audio Via Ethernet) is a revolutionary signal transport system that allows you to route multiple channels of audio over standard Ethernet hardware and cabling. A single RAVE network can now replace hundreds of audio cables, dramatically reducing installation time, effort and cabling costs while improving routing flexibility and audio performance. QSControl.net devices replace the RAVE models. RAVE 160S-24 \| RAVE 161S-24 \| RAVE 188S-24 \| RAVE 80S \| RAVE 81S \| RAVE 88S
	CM16a (discontinued) Powerful amplifier management in a QSControl networked audio system, using Ethernet technology to communicate with the host system controller.
	BASIS 902zz (discontinued) The BASIS 902zz combines amplifier and loudspeaker control, monitoring and protection, configurable DSP, and CobraNet™ audio transport.

Products

All Products
Amplifiers
Loudspeakers
Line Array Systems
Digital Signal Processors
Network Audio Systems
Software Downloads
Accessories
Archived Models

Applications